verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X200SH

The AirTAC SE63 Standard Cylinder SE63X200SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke200 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$116.74 $124.24Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X200SH

The AirTAC SE63X200SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, utilizing a 63 mm bore and a 20 mm hard-chrome piston rod. Because the model includes the H seal option, it relies on FKM (Viton) elastomers that widen the operating temperature range up to 150 C, making the unit highly suitable for high-heat industrial processing.

The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery frames. Equipped with a built-in magnet (S option), the cylinder seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to dial in deceleration screws, softening hard mechanical impacts during high-speed 30-800 mm/s operations.

Airtac SE63 Standard Cylinder SE63X200SH Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X200SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke200 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X200SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X200SH Is Used

precision_manufacturing

Injection Mold Ejection

With 1559 N of push force at 0.5 MPa and a 150 C Viton seal, this cylinder reliably ejects hot plastic parts from injection molding machinery without elastomer degradation.

conveyor_belt

Hot Glass Diverting

The 200 mm stroke and FKM high-temperature seals make it ideal for diverting or sorting newly formed hot glass containers along a conveyor system.

package_2

Thermoform Tray Sealing

Delivers consistent 1402 N of pull force at 0.5 MPa to open and close heavy heated sealing platens in food packaging thermoform lines.

Is the Airtac SE63 Standard Cylinder SE63X200SH the Right Cylinder?

When sizing this 63 mm bore actuator, consider stepping down to a 50 mm bore cylinder if your application only requires 982 N of push at 0.5 MPa, which saves valuable space. Conversely, if your fixture demands greater thrust, upgrading to an 80 mm bore provides 2513 N of push at 0.5 MPa. Keep in mind that a standard SE cylinder cannot hold a load if air pressure is lost or the valve is centered; the piston will drift, so an external guide or BSE rod lock is required for strict position holding. Additionally, the PT3/8 port and M16x1.5 rod thread carry robust side loads, but at a 200 mm stroke, you should still verify structural support to prevent rod-bearing bending.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X200SH FAQ

The SE63X200SH delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The fluid port size is PT3/8.

Yes, the SE63X200SH is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. It features an extruded aluminum barrel without external tie rods and includes adjustable air cushions at both ends to fine-tune end-stop deceleration.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X200SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X200SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.