
The AirTAC SE63 Standard Cylinder SE63X200SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X200SN is a double-acting, single-rod ISO 15552 profile cylinder with a 63 mm bore and 200 mm stroke. It delivers a substantial 1559 N push force at 0.5 MPa and 2182 N at 0.7 MPa, making it well-suited for medium-to-heavy industrial actuation. The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies fixture integration.
This configuration includes a built-in magnet for non-contact position sensing using CMSE reed or DMSE electronic switches. It utilizes an NBR seal compound for reliable operation in standard temperature environments, and features field-adjustable air cushioning at both ends to decelerate the payload smoothly near the stroke limits.
| Model | Airtac SE63 Standard Cylinder SE63X200SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
With 1559 N of push force at 0.5 MPa, this cylinder reliably actuates a diverter arm on a conveyor line to route heavy wooden pallets onto a secondary packaging track.
The 200 mm stroke provides the precise linear travel needed to fold large corrugated cardboard flaps on a case erector, while the NBR seals endure continuous high-cycle operation.
Leveraging the 2182 N force available at 0.7 MPa, this unit drives a pneumatic blade to cleanly shear plastic gates from injection molded parts directly at the molding machine.
When sizing this actuator, consider stepping down to a 50 mm bore if your load requires only 982 N of push force at 0.5 MPa, or moving up to an 80 mm bore if you need the 2513 N available at 0.5 MPa. The 200 mm stroke on this 63 mm bore provides ample travel for typical machine ejection and gating tasks. Because the stroke is 200 mm, side-loading stress on the rod bearing is moderate, but an external guide rail is still recommended if the load is heavy or offset.
As a standard ISO 15552 cylinder, the SE63X200SN is dimensionally interchangeable with other ISO 15552 cylinders, allowing direct retrofitting using existing FA, FB, or TC mounting hardware. Remember that the adjustable air cushion only decelerates the piston near the end of travel; it does not hold the load if air pressure is lost. For position holding without live pressure, use a BSE rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It features a PT3/8 port, a 20 mm rod, and operates at speeds of 30-800 mm/s.
No, the SE63X200SN is a standard double-acting cylinder and the piston will drift if air pressure is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke ends and does not function as a brake. For secure load holding, an external rod lock or the AirTAC BSE variant is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.