verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X220STC

The AirTAC SE63 Standard Cylinder SE63X220STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 220mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke220 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$184.01 $191.51Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X220STC

The AirTAC SE63X220STC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Featuring a 63 mm bore and 220 mm stroke, it utilizes a clean extruded aluminum barrel without external tie rods, making it highly compact and resistant to corrosion while allowing for flush machine mounting.

This specific configuration includes a TC centre trunnion mounting interface and a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. The field-adjustable pneumatic cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration, effectively softening hard impacts during high-speed cycling.

Airtac SE63 Standard Cylinder SE63X220STC Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X220STC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke220 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X220STC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×220Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X220STC Is Used

packaging

Palletizer Flap Folder

Uses the 1559 N push force and 220 mm stroke to securely fold corrugated cardboard flaps on high-speed palletizing lines before strapping.

factory

Injection Mold Platen Ejector

Leverages the TC trunnion mount to pivot and eject molded plastic parts cleanly, absorbing side loads without binding during retraction.

straighten

Metal Stamping Stripper

Provides consistent 1402 N pull force to strip stamped sheet metal blanks from progressive dies, utilizing adjustable cushions to halt rapid retraction.

Is the Airtac SE63 Standard Cylinder SE63X220STC the Right Cylinder?

Delivering 1559 N of push force at 0.5 MPa, this 63 mm bore unit sits perfectly between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push), allowing you to step down for lighter duty or up for heavier loads. The TC trunnion mount is ideal for pivoting mechanisms, but note that a plain SE cylinder will drift and cannot hold a load if air pressure is lost; for critical position holding, consider the BSE rod lock variant. As a true ISO 15552 profile cylinder, it offers a direct dimensional replacement for other ISO 15552 cylinders without relying on specific brand footprints.

With a 220 mm stroke, the 20 mm rod and M16x1.5 thread handle substantial loads, but long unsupported strokes introduce side-load bending risks. For optimal bearing life, pair this cylinder with an external guide rail to prevent rod-bearing wear.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X220STC FAQ

This 63 mm bore cylinder uses a PT3/8 port. At 0.5 MPa it provides 1559 N push and 1402 N pull force. At 0.7 MPa it provides 2182 N push, and it reaches a maximum push of 318 kgf at 1.0 MPa.

Yes, the SE63X220STC is dimensionally interchangeable per ISO 15552 standards, allowing it to direct replace other profile cylinders. The included -S magnet also ensures immediate compatibility with AirTAC CMSE and DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X220STC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X220STC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.