
The AirTAC SE63 Standard Cylinder SE63X240SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 240mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X240SH is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a robust 1559 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush and resists corrosion. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors.
Equipped with a high-temperature FKM (Viton) seal, this unit reliably operates from -20 to 150 C in thermal stress environments. It features field-adjustable pneumatic cushioning at both ends to soften hard end stops, and its 240 mm stroke is a made-to-order length for specialized mid-range travel.
| Model | Airtac SE63 Standard Cylinder SE63X240SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a hot-knife gate cutter on a plastic injection molding line, utilizing the 1559 N push force and FKM seal to withstand ambient radiant heat near the mold halves.
Transfers product bundles into a shrink-wrap heat tunnel, where the 240 mm stroke accommodates varying pack sizes and the Viton seal resists thermal degradation from tunnel exhaust.
Drives a diverter arm on a conveyor sorting line, relying on the integrated magnet for DMSE sensor feedback to confirm divert positions before the upstream flow advances.
This 63 mm bore provides 1559 N push at 0.5 MPa. If your application requires less force, the 50 mm bore offers 982 N push; if you need substantially more thrust, stepping up to the 80 mm bore yields 2513 N push. Because the 240 mm stroke exceeds the 1500 mm standard limit for this bore, it is manufactured as a non-standard made-to-order unit.
The -S magnet supports CMSE and DMSE position sensing, while the H seal extends your thermal envelope to 150 C. For strokes of 300 mm or longer, the bending moment on the rod bearing increases; although 240 mm is below this threshold, always verify side-load limits and use an external guide for heavy off-center loads. Note that the adjustable air cushion only decelerates the piston near stroke end and will not hold a load if air pressure is lost.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa it provides 1559 N push and 1402 N pull. At 0.7 MPa the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Thanks to the FKM seal, it operates in temperatures from -20 to 150 C at speeds of 30-800 mm/s.
Yes. The SE63X240SH shares the exact ISO 15552 mounting interface and PT3/8 port size of comparable profile cylinders, allowing direct dimensional interchange. You can reuse existing mounting hardware without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.