
The AirTAC SE63 Standard Cylinder SE63X250SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 250mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X250SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull, driven by a 63 mm bore and a 250 mm stroke. The integrated -S magnet allows seamless position tracking with CMSE reed or DMSE electronic sensors.
This unit features a high-temperature FKM (Viton) seal, expanding the operating range from -20 C up to 150 C for thermal-heavy processes. The extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery while providing field-adjustable pneumatic cushioning at both ends to soften hard end stops.
| Model | Airtac SE63 Standard Cylinder SE63X250SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Withstands 150 C ambient heat near mold platens while providing 1559 N push to reliably eject hot plastic automotive interior panels.
Handles high-temperature secondary cropping and deflashing of extruded profiles, using the 250 mm stroke to clear the cutting bay.
Cycles a 250 mm diverter arm in a packaging line, where the FKM seal resists degraded hot-melt adhesive overspray and the -S magnet tracks position.
Choosing this 63 mm bore depends on your force and thermal requirements. If you need less force, the 50 mm bore offers 982 N push at 0.5 MPa; if you need more power, the 80 mm bore provides 2513 N push. Because the 250 mm stroke is substantial, the 20 mm rod and M16x1.5 thread carry significant side load, so an external guide is recommended to prevent rod-bearing bending.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standard profile cylinders. To match this exact configuration, specify the 63 mm bore, 250 mm stroke, PT3/8 port, basic mounting, -S magnet, and FKM Viton seal. Note that a plain SE does not hold its load when air is lost; for position holding, consider the BSE rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed ranges from 30 to 800 mm/s.
Yes. The SE63X250SH is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders. The built-in -S magnet works directly with AirTAC CMSE reed and DMSE electronic sensors for end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.