
The AirTAC SE63 Standard Cylinder SE63X25SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X25SH is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a robust 1559 N push force at 0.5 MPa within a compact 25 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and reduces machine footprint.
Equipped with high-temperature FKM (Viton) seals, this unit reliably operates from -20 to 150 C, making it ideal for demanding thermal environments. The integrated magnet (-S) supports CMSE reed and DMSE electronic position sensing, while the field-adjustable air cushioning at both ends lets you fine-tune end-of-stroke deceleration.
| Model | Airtac SE63 Standard Cylinder SE63X25SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Applies 1559 N of push force at 0.5 MPa to secure small plastic injection mold halves, utilizing the FKM seal to withstand radiant heat from heated platens.
Drives a 25 mm rapid stroke on a continuous band heat sealer, where the Viton seal survives sustained 150 C ambient temperatures near the sealing jaws.
Ejects formed metal stamped parts from a die bed, using the integrated magnet and DMSE sensor to confirm ejection completion before the press cycles.
Selecting the SE63X25SH is optimal when your application requires high force in a very short stroke. If you need less thrust, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas upgrading to the 80 mm bore provides 2513 N for heavier loads. Because this is a standard 63 mm bore with a 25 mm stroke, it serves as a direct replacement for any ISO 15552 cylinder with identical PT3/8 ports and matching mounting hardware.
Remember that a standard double-acting cylinder drifts when air pressure is removed or exhausted; this model cannot hold a vertical load without live pressure. If your setup requires positive holding, consider the BSE rod lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. Thanks to the FKM seal, it operates in temperatures ranging from -20 to 150 C, with a speed of 30-800 mm/s.
Yes, the SE63X25SH is dimensionally interchangeable per ISO 15552 standards. You can swap it directly with other ISO 15552 profile cylinders sharing the same 63 mm bore, 25 mm stroke, PT3/8 port thread, and mounting accessories without altering your machine layout.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.