
The AirTAC SE63 Standard Cylinder SE63X25SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X25SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, making it well-suited for short, high-impact cycles. The extruded aluminum barrel lacks external tie rods, which keeps the body corrosion-resistant and simplifies flush mounting on machinery.
This 63mm bore unit features a built-in magnet for CMSE reed and DMSE electronic position sensing, alongside NBR seals for standard pneumatic duty. Field-adjustable air cushions at both ends allow you to fine-tune end-of-stroke deceleration, protecting components from mechanical shock during rapid 30-800 mm/s operations.
| Model | Airtac SE63 Standard Cylinder SE63X25SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force at 0.5 MPa to knock stamped metal sheets out of a die, relying on the 25mm stroke for rapid, short-cycle ejection.
Drives a folding arm on a packaging line, where the NBR seals handle standard ambient air and the adjustable cushion softens the 25mm end stop.
Presses bearings or pins into housings on an assembly line, utilizing the DMSE electronic sensors to confirm pressing completion.
Selecting this 63mm bore involves balancing force and spatial limits; it provides 1559 N push at 0.5 MPa. If your application requires less force, the 50mm bore offers 982 N push, while stepping up to the 80mm bore yields 2513 N push. Because this is a short 25mm stroke, side-load stress on the rod bearing is minimal, though the adjustable cushioning is essential for softening hard impacts at high speeds. Remember that a standard SE cylinder relies on live air pressure to move; it will drift if air is lost or a valve is centered, so a BSE rod lock is required for strict position holding.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders. To match this exact configuration, specify the 63mm bore, 25mm stroke, PT3/8 port, basic mounting, NBR seals, and the -S magnet for sensor compatibility.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s and uses a PT3/8 port.
No, the SE63X25SN is a standard double-acting cylinder and does not hold position unpowered. The adjustable air cushions only decelerate the piston near the stroke ends; they are not brakes. For fail-safe load holding, consider an AirTAC BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.