
The AirTAC SE63 Standard Cylinder SE63X270 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 270mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X270 is a double-acting single-rod ISO 15552 profile cylinder offering 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. Its square extruded aluminum barrel removes external tie rods, yielding a flush body that resists corrosion and simplifies flush mounting on machinery frames. A field-adjustable pneumatic cushion at both ends lets technicians dial in end-of-stroke deceleration via a screw, softening hard impacts when cycling at speeds up to 800 mm/s.
This 63 mm bore unit features a PT3/8 port, a 20 mm hard-chrome rod with an M16x1.5 thread, and a 36 mm cushion length. Because this specific SKU lacks the built-in magnet suffix, it does not support AirTAC CMSE or DMSE position sensing out of the box. It provides true ISO 15552 / VDMA 24562 dimensional interchangeability, allowing seamless integration with standardized mounting hardware.
| Model | Airtac SE63 Standard Cylinder SE63X270 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 270 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×270 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes raw bar stock into the spindle collet with 1559 N of thrust at 0.5 MPa, using the 270 mm stroke to index material precisely without tie-rod interference.
Folds heavy cardboard flaps at high speed, relying on the field-adjustable air cushion to soften the 36 mm end-of-stroke impact and prevent mechanical damage.
Actuates a routing gate to redirect loaded pallets, benefiting from the extruded aluminum profile that mounts flush to the conveyor frame without protruding hardware.
If 1559 N push at 0.5 MPa is too much force, step down to the 50 mm bore delivering 982 N; if you need heavier thrust, step up to the 80 mm bore providing 2513 N. Remember that a plain SE cylinder cannot hold a load if air pressure drops or the valve centers—the piston will drift, so add a BSE rod lock for fail-safe holding. At 270 mm stroke, the 20 mm rod is robust, but the extended length increases rod-bearing bending moments under lateral stress; always use an external guide to prevent side-load damage. To replace an existing ISO 15552 unit, match the 63 mm bore, 270 mm stroke, PT3/8 port, and your required mounting accessory.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, push increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa, with an operational speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, allowing direct replacement for other ISO 15552 cylinders. However, it has no built-in magnet for CMSE/DMSE sensors, and the adjustable cushion only decelerates the piston—it does not lock the rod. If you need position holding without air pressure, use a BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.