
The AirTAC SE63 Standard Cylinder SE63X275S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 275mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X275S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Driven by a 63 mm bore and a 275 mm stroke, it operates efficiently between 30-800 mm/s within a 0.15-1.0 MPa pressure range. The integrated -S magnet enables precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors.
Unlike traditional tie-rod builds, this unit utilizes a square extruded aluminum barrel that mounts flush against machine frames while resisting corrosion. The pneumatic cushioning at both ends is field-adjustable via a set screw, allowing technicians to tune deceleration and soften hard end stops dynamically based on the moving load.
| Model | Airtac SE63 Standard Cylinder SE63X275S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates heavy-duty routing gates on packaging conveyors, utilizing the 1559 N push force to reliably pivot loaded pallets without stalling.
Secures aluminum castings inside CNC machining centers, where the 275 mm stroke reaches across wide work envelopes to lock parts in place.
Drives mechanical folding arms on automated case erectors, using the adjustable end cushions to prevent impact damage when closing flaps at high speed.
Selecting the SE63X275S is optimal when your application requires approximately 1559 N of push force at 0.5 MPa. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push, while upgrading to the 80 mm bore provides 2513 N for heavier demands. This cylinder includes a PT3/8 port, a 20 mm rod with an M16x1.5 thread, and the -S magnet for position sensing.
Because this model features a 275 mm stroke, the extended rod is subject to bending moments under side loads; an external guide mechanism is recommended to prevent premature rod-bearing wear. Note that while the adjustable cushion decelerates the piston near stroke end, it is not a locking device—the piston will drift if air pressure is lost, so a BSE rod lock is required for strict position holding.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X275S is dimensionally interchangeable per ISO 15552 standards. You can drop it directly into existing mounting hardware using the standard footprint, and the built-in magnet allows seamless integration with AirTAC CMSE or DMSE position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.