
The AirTAC SE63 Standard Cylinder SE63X290S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 290mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X290S is a double-acting, single-rod ISO 15552 profile cylinder engineered for mid-range industrial pushing and pulling. Operating at 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, scaling up to a maximum of 318 kgf at 1.0 MPa. Its 63 mm bore pairs with a PT3/8 port and a 20 mm rod to provide balanced flow dynamics for demanding cycles.
This variant includes a built-in magnet (-S) designed specifically for AirTAC CMSE reed and DMSE electronic position sensors, giving you reliable end-of-stroke detection. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant profile that mounts flush in tight machine cells. Furthermore, the field-adjustable pneumatic cushioning at both ends allows you to tune the 36 mm cushion length to soften hard end stops at high velocities.
| Model | Airtac SE63 Standard Cylinder SE63X290S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 1559 N push at 0.5 MPa required to fold heavy cardboard flaps on high-speed packaging lines, utilizing the 290 mm stroke to clear the machine frame.
Positions sheet metal backstops on a press brake with repeatable accuracy, where the built-in magnet and DMSE sensors confirm the 290 mm retraction point.
Actuates a routing gate to divert heavy wooden pallets between conveyor lanes, relying on the smooth tie-rod-free extruded profile to resist dust and debris.
When sizing this 63 mm bore actuator, compare its 1559 N push at 0.5 MPa against the next size down, the 50 mm bore (982 N push), or the next size up, the 80 mm bore (2513 N push). Because the SE63X290S uses a 290 mm stroke, the unsupported piston rod is highly susceptible to bending under lateral stress; always incorporate an external guide rail to prevent side-load damage to the rod bearing. Remember that a standard SE cylinder cannot hold a load if air pressure drops—the adjustable cushion only decelerates the piston near the stroke end, so integrate a BSE rod lock for fail-safe holding. As a dimensionally interchangeable ISO 15552 component, it drops directly into existing footprints using standard LB or FA mounting hardware and PT3/8 connections.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X290S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE63X290S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting interface, PT3/8 port locations, and 20 mm rod thread dimensions. You can drop it into existing machinery without modifying the mounting plate.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.