verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X300G

The AirTAC SE63 Standard Cylinder SE63X300G is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke300 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$112.81 $120.31Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X300G

The AirTAC SE63X300G is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes.

This 63 mm bore unit features a G3/8 BSPP port and a 36 mm adjustable air cushion at both ends. The cushioning is field-tunable via a screw, allowing you to soften hard end stops at speed. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensors out of the box.

Airtac SE63 Standard Cylinder SE63X300G Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X300G
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke300 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X300G

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X300G Is Used

package_2

Carton Erector Jaws

Drives the folding jaws of a continuous-motion carton erector, utilizing the 1559 N push force at 0.5 MPa to cleanly form heavy corrugated board.

conveyor_belt

Pallet Diverters

Actuates a pusher arm on a modular conveyor belt line, relying on the 300 mm stroke to shift products smoothly between parallel lanes.

factory

Injection Mold Ejector

Strikes the knock-out pins of an injection molding machine, where the field-adjustable air cushion protects the mold halves from harsh end-of-stroke impacts.

Is the Airtac SE63 Standard Cylinder SE63X300G the Right Cylinder?

If you need to step the bore down, the 50 mm variant provides 982 N of push at 0.5 MPa, whereas stepping up to the 80 mm bore yields 2513 N. As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a direct replacement for other ISO 15552 cylinders, sharing standard mounting hardware like FA front flanges or LB foot brackets.

Because the stroke is 300 mm, the unsupported rod length introduces a bending moment on the rod bearing; for heavy offset loads, utilize an external guide to prevent premature wear. Furthermore, a plain SE cylinder will drift if air is lost or the valve is centered, so integrate a BSE rod lock for fail-safe load holding.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X300G FAQ

The SE63X300G generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE63X300G is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using the same bore and stroke. It uses a G3/8 port and M16x1.5 rod thread.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X300G

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X300G and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.