
The AirTAC SE63 Standard Cylinder SE63X305S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 305mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X305S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push at 0.5 MPa. Its 305 mm stroke falls outside the standard catalog list, making it a tailored made-to-order configuration for specific traverse requirements. The integrated -S magnet enables precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors.
This unit utilizes a square extruded aluminum barrel that completely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Field-adjustable pneumatic cushioning at both end caps allows technicians to tune the deceleration profile via a set screw, softening hard impacts when cycling loads at speed.
| Model | Airtac SE63 Standard Cylinder SE63X305S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 305 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×305 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives diverter arms on 1-meter wide packaging conveyors, utilizing the 1559 N push force to reliably shift loaded pallets without bounce.
Folds and squares corrugated cardboard blanks during automated carton erecting, where the 305 mm stroke provides the exact reach needed for larger box formats.
Positions sheet metal backstops on CNC press brakes, relying on the CMSE/DMSE magnet for repeatable positioning and the extruded profile for rigid mounting.
Selecting this 63 mm bore provides a substantial step up from the 50 mm size (which offers 982 N push at 0.5 MPa) without jumping to the bulkier 80 mm size (2513 N push at 0.5 MPa). Because the 305 mm stroke exceeds the 63 mm bore's maximum standard stroke of 1500 mm, it is manufactured as a non-standard order. The PT3/8 port and M16x1.5 rod thread are fixed by the bore size.
With a 305 mm stroke, the unsupported piston rod is subjected to higher bending moments under side loads; utilizing an external guide rail is highly recommended to prevent premature rod-bearing wear. Note that the adjustable air cushion only decelerates the piston near the stroke ends and does not lock the load—if air pressure is lost, the cylinder will drift, requiring a BSE rod lock for fail-safe holding.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The 63 mm bore generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N. The maximum rated push force is 318 kgf at 1.0 MPa.
Yes, the SE63X305S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing footprints and reuse standard mounting accessories like FA flanges or LB foot brackets, provided the PT3/8 port and 305 mm stroke meet your spatial constraints.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.