
The AirTAC SE63 Standard Cylinder SE63X315S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 315mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X315S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa across a 315 mm stroke. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving the three integrated sensor grooves fully accessible for position detection.
Because this unit includes the -S magnet, it is fully primed for AirTAC CMSE reed and DMSE electronic switches without requiring aftermarket modifications. The integrated pneumatic cushioning at both ends is field-adjustable via a set screw, allowing you to fine-tune end-of-stroke deceleration and eliminate hard metal-to-metal impacts during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X315S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 315 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×315 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to actuate heavy lane-diverter arms on high-throughput packaging conveyor lines over a 315 mm reach.
Secures cast aluminum housings during CNC machining, using its adjustable end-cushions to prevent jarring the precision workpiece at stroke completion.
Drives secondary ejector arms inside an injection molding cell, using the built-in magnet to trigger DMSE electronic sensors for precise part-release timing.
Delivering 1559 N of thrust at 0.5 MPa, this 63 mm bore sits perfectly between the 982 N push of a 50 mm cylinder and the 2513 N output of an 80 mm unit, letting you step up or down depending on your actual payload. At 315 mm of stroke, the 20 mm rod and front bearing face increased bending moments under heavy lateral loads, so utilizing an external guide rail is strongly recommended to prevent premature seal wear.
For replacements, this model maps directly to standard ISO 15552 dimensional envelopes and uses a PT3/8 port. Remember that a standard profile cylinder relies on live air pressure to hold its position; if your process loses air, the piston will drift. For fail-safe load holding, consider the BSE rod-lock variant. To complete the setup, pair this cylinder with your required mounting bracket and CMSE or DMSE sensors.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X315S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact mounting footprint and PT3/8 port sizes of competing ISO profile cylinders for straightforward direct retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.