verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X325

The AirTAC SE63 Standard Cylinder SE63X325 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 325mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke325 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$120.00 $127.50Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X325

The AirTAC SE63X325 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force and 1402 N of pull force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machinery frames while providing sensor grooves on three sides for flexible switch placement.

This 63 mm bore unit features a PT3/8 port and a 20 mm hard-chrome plated rod. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s operations. Note this specific SKU lacks a built-in magnet, so it is not equipped for CMSE or DMSE position sensing without modification.

Airtac SE63 Standard Cylinder SE63X325 Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X325
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke325 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X325

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×325Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X325 Is Used

packaging

Palletizer Case Pusher

Drives a 325 mm stroke to push heavy corrugated cartons onto palletizing conveyors, utilizing the 1559 N push force to overcome friction without stalling.

factory

Injection Mold Ejection

Extends deep into an injection molding machine to eject plastic parts, relying on the 36 mm adjustable cushion to absorb the 1402 N retract impact at high speeds.

straighten

Metal Stamping Stripper

Acts as a stripper arm in a metal stamping press, using its 63 mm bore and 325 mm reach to separate sheet metal from progressive dies with 1559 N of force.

Is the Airtac SE63 Standard Cylinder SE63X325 the Right Cylinder?

Delivering 318 kgf at 1.0 MPa, this model sits perfectly between the 50 mm bore (982 N push @0.5 MPa) and the 80 mm bore (2513 N push @0.5 MPa), allowing you to step down for lighter duty or up for heavier loads. Because the 325 mm stroke exceeds the 300 mm threshold, the unsupported rod length introduces a bending moment on the rod bearing; utilizing an external guide rail is strongly advised to prevent premature wear and side-load damage.

As a true ISO 15552 profile cylinder, it provides a direct dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting interfaces and accessories. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not lock or hold the load if air pressure is lost—if your application requires position holding during exhaust, consider the BSE rod-lock variant.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X325 FAQ

The SE63X325 generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. It uses a PT3/8 port and a 20 mm diameter rod with an M16x1.5 thread.

No, the SE63X325 is a standard double-acting cylinder. Its field-adjustable air cushions only decelerate the piston near the stroke ends; they do not act as a brake. If you need to hold a load vertically or without live pressure, you must use an external rod lock or the AirTAC BSE variant.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X325

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X325 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.