
The AirTAC SE63 Standard Cylinder SE63X350SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 350mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X350SN is a double-acting single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and 350 mm stroke. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, utilizing a PT3/8 port and a 20 mm hard-chrome rod. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant envelope that mounts flush in tight machine cavities.
Field-adjustable air cushions at both ends allow technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling. This unit includes a built-in magnet for CMSE and DMSE position sensing, and uses an NBR seal suitable for standard operating temperatures from -20 to +70 C.
| Model | Airtac SE63 Standard Cylinder SE63X350SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding arms on continuous-motion carton erectors, utilizing the 1559 N push force to securely crease heavy paperboard at 350 mm stroke.
Actuates routing gates on diverter conveyors, where the adjustable cushion reliably halts the 350 mm travel without slamming into end stops.
Shuttles raw billets into CNC lathes, using the NBR seal and CMSE magnet feedback to confirm part seating in oily environments.
If your assembly requires less force, the adjacent 50 mm bore yields 982 N of push at 0.5 MPa, whereas stepping up to the 80 mm bore provides 2513 N. Because this cylinder features a 350 mm stroke, the unsupported rod load increases the risk of bearing bending; pair it with an external guide to prevent premature wear. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement sharing standardized mounting hardware, PT3/8 ports, and the -S magnet interface.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the 63 mm bore provides 1559 N of push and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
No, the adjustable air cushion only decelerates the piston near the stroke ends and does not function as a locking brake. If the application requires position holding without live pressure, you must use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.