
The AirTAC SE63 Standard Cylinder SE63X370SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 370mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X370SN is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal pneumatics.
This 63 mm bore unit features a built-in magnet for CMSE reed and DMSE electronic position sensing, paired with an NBR seal suited for standard operating temperatures. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 370 mm strokes.
| Model | Airtac SE63 Standard Cylinder SE63X370SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 370 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×370 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push and 370 mm reach required to open and fold large corrugated carton flaps at high cycle rates on packaging lines.
Shifts heavy loaded pallets laterally across transfer sections, utilizing the full stroke and robust NBR seal for reliable daily throughput.
Actuates heavy machine tool safety doors, using the integrated magnet to trigger DMSE electronic sensors for precise closed-position interlocking.
If your assembly requires less force, stepping down to the 50 mm bore yields a 982 N push at 0.5 MPa, whereas moving up to the 80 mm bore provides a 2513 N push. Because the stroke is 370 mm, the 20 mm rod and front bearing face increased bending moments under lateral loads; always support the payload with an external linear guide to prevent premature wear. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement sharing standard mounting hardware, a PT3/8 port, and the -S magnet interface.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this cylinder provides a 1559 N push and a 1402 N pull. At 0.7 MPa, the push force reaches 2182 N. The maximum allowable push force is 318 kgf when operating at the 1.0 MPa pressure limit.
No, the SE63X370SN is a standard double-acting cylinder and the piston will drift if air is exhausted or the valve is centered. The adjustable air cushions only decelerate the rod near stroke ends and do not function as a locking mechanism.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.