
The AirTAC SE63 Standard Cylinder SE63X380S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 380mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X380S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Designed with a 63 mm bore and a 380 mm stroke, it utilizes a square extruded aluminum barrel that eliminates external tie rods. This profile not only resists corrosion but also allows for flush mounting against machine frames, saving valuable space in tight assemblies.
Equipped with a built-in magnet (-S), this model seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to tune the deceleration via a setscrew, softening hard end stops during high-speed 30-800 mm/s operations. This is a genuine pneumatic cushion, not a static bumper, ensuring smooth kinetic energy absorption.
| Model | Airtac SE63 Standard Cylinder SE63X380S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles the 1559 N push force required to pivot heavy guide arms on a high-speed beverage bottling conveyor, using the 380 mm stroke to fully clear the passing pallets.
Extends 380 mm to fold large corrugated carton flaps in a packaging line, relying on the adjustable pneumatic cushion to prevent hard impacts that would crush the board.
Pushes stamped sheet metal parts out of a hydraulic press bed, utilizing the 20 mm hard-chrome rod and 318 kgf max thrust to reliably clear heavy blanks.
When sizing this 63 mm bore actuator, consider stepping down to a 50 mm bore cylinder if your application only requires 982 N of push at 0.5 MPa, which saves physical envelope and air consumption. Conversely, if your load demands more thrust, upgrading to an 80 mm bore provides 2513 N at 0.5 MPa. Because this SE63X380S features a 380 mm stroke, the extended piston rod is highly susceptible to side-load bending; always incorporate an external guide rail to prevent premature rod-bearing wear.
As a true ISO 15552 / VDMA 24562 profile cylinder, this unit offers direct dimensional interchangeability with other ISO 15552 cylinders, making it an ideal retrofit solution. It uses a PT3/8 port and a 20 mm rod with an M16x1.5 thread. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not hold a load. If your application must maintain vertical position without live air pressure, specify a BSE rod-lock cylinder or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X380S generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE63X380s is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting interface and PT3/8 port locations of other ISO 15552 profile cylinders, allowing a seamless direct retrofit without modifying your existing machine plates.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.