verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X400H

The AirTAC SE63 Standard Cylinder SE63X400H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 400mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke400 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$140.73 $148.23Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X400H

The AirTAC SE63X400H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature operation. Delivering 1559 N of push force at 0.5 MPa, this 63 mm bore unit features a 400 mm stroke and a specialized FKM (Viton) seal that extends the operating range from -20 C up to 150 C. Because it lacks external tie rods, the square extruded aluminum barrel provides a flush mounting surface that resists corrosion and simplifies installation in tight machinery spaces.

This model relies on field-adjustable pneumatic cushioning at both ends, allowing technicians to dial in end-of-stroke deceleration via a set screw rather than relying on a fixed bumper. Note that this specific SKU omits the built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box. The standardized ISO 15552 footprint guarantees true dimensional interchangeability with other cylinders in this profile class, making it a reliable retrofit component.

Airtac SE63 Standard Cylinder SE63X400H Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X400H
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke400 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X400H

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X400H Is Used

factory

Injection Mold Platen Ejection

Survives ambient heat near mold halves while providing 1559 N of push at 0.5 MPa to eject plastic parts reliably over the 400 mm stroke.

conveyor_belt

Hot Stamping Feed Discharge

FKM Viton seals endure elevated ambient temperatures near heated stamping dies, utilizing the adjustable cushion to soften high-speed rod stops.

sync_alt

Powder Coating Oven Doors

The 63 mm bore's 2182 N of push at 0.7 MPa easily opens and closes heavy industrial oven doors where standard NBR seals would degrade.

Is the Airtac SE63 Standard Cylinder SE63X400H the Right Cylinder?

If your application requires slightly less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, while stepping up to the 80 mm bore provides 2513 N for heavier loads. Because this is a 400 mm stroke, the unsupported piston rod is subject to bending under lateral loads; an external guide bearing is strongly recommended to prevent rod-bearing wear. Remember that a standard SE cylinder cannot hold a load if air pressure is lost or the valve centers—the piston will drift. For position-holding safety, consider the BSE rod-lock variant. To match this unit for an ISO 15552 replacement, verify the 63 mm bore, 400 mm stroke, PT3/8 port, and high-temperature FKM seal requirements.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X400H FAQ

This 63 mm bore cylinder generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. Equipped with an FKM (Viton) seal, it operates from -20 C to 150 C.

Yes, the SE63X400H is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders, provided your mounting hardware and PT3/8 port match.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X400H

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X400H and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.