
The AirTAC SE63 Standard Cylinder SE63X400S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 400mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X400S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for seamless retrofitting.
Equipped with a built-in magnet for CMSE reed and DMSE electronic position sensors, this 63 mm bore unit utilizes a field-adjustable air cushion at both ends to decelerate the Ø20 mm rod smoothly over its 400 mm stroke. The cushioning screw allows you to tune end-stop impact precisely, ensuring reliable performance across the 30-800 mm/s speed range without functioning as a position hold.
| Model | Airtac SE63 Standard Cylinder SE63X400S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizing 1559 N of push force at 0.5 MPa, this cylinder opens and squares heavy corrugated blanks over a 400 mm travel distance, relying on its adjustable cushion to soften the end stop at high cycling speeds.
The 63 mm bore provides the lateral thrust needed to push heavy pallets onto secondary packaging lines, while the square tie-rod-free barrel mounts flush to conveyor framing to avoid snagging.
Driven by 2182 N of thrust at 0.7 MPa, it ejects molded plastic parts from press cavities, using the integrated magnet to trigger DMSE electronic sensors for precise ejection confirmation.
If 1559 N of push at 0.5 MPa is too much force, stepping down to the 50 mm bore yields 982 N, whereas moving up to the 80 mm bore provides 2513 N. Because this is a 400 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads; integrating an external guide rail is strongly recommended to prevent rod-bearing damage.
For direct ISO 15552 replacements, match the 63 mm bore, 400 mm stroke, PT3/8 port, and your required mounting accessory. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift. For static holding, consider the BSE rod-lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X400S generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 318 kgf.
Yes, the SE63X400S is dimensionally interchangeable per ISO 15552 and VDMA 24562 standards. You can drop it directly into existing footprints (LB, FA, TC) using the same PT3/8 port and M16x1.5 rod-end thread, and the built-in -S magnet works seamlessly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.