
The AirTAC SE63 Standard Cylinder SE63X400SG is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 400mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X400SG is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. Delivering 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa, it features a 63 mm bore and a 400 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for universal hardware interchangeability.
This specific configuration includes a built-in magnet (S) for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches seated in the body's three-sided sensor grooves. It utilizes a G3/8 BSPP port and field-adjustable air cushioning at both ends. The cushioning uses a needle screw to decelerate the piston near stroke end, softening hard impacts without acting as a locking mechanism.
| Model | Airtac SE63 Standard Cylinder SE63X400SG |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding flaps on a continuous carton erector, utilizing the 1559 N push force at 0.5 MPa and 400 mm stroke to reliably open and square corrugated blanks.
Actuates a diverter gate on a packaging conveyor, where the adjustable end cushions soften the 400 mm stroke transition and the built-in magnet confirms arm position.
Raises heavy warp beams into loom loading position, depending on the 2182 N push at 0.7 MPa and the rigid square profile barrel for stable, flush mounting.
If your application requires less thrust, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas moving up to the 80 mm bore provides 2513 N. Since the 400 mm stroke is substantial, the unsupported piston rod (Ø20 mm, M16x1.5 thread) is prone to bending under side loads; always use an external guide to prevent rod-bearing wear. Remember that a standard SE cylinder drifts when air is exhausted—use a BSE rod lock variant if the load must be held without live pressure. To retrofit this exact unit, match the 63 mm bore, 400 mm stroke, G3/8 port, and the -S magnet requirement.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at the maximum operating pressure of 1.0 MPa.
Yes, the SE63X400SG is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares standard mounting footprint dimensions and can be a direct replacement for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.