
The AirTAC SE63 Standard Cylinder SE63X40TC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 40mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X40TC is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, high-force actuation. It delivers 1559 N of push force and 1402 N of pull force at 0.5 MPa, scaling to a maximum of 318 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while retaining structural rigidity.
This specific configuration incorporates a TC centre trunnion mounting interface, allowing the cylinder to pivot freely during operation to accommodate lateral misalignment. The end caps feature field-adjustable pneumatic cushioning, enabling technicians to tune end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers. Note that this SKU is supplied without a built-in magnet, so it does not directly support CMSE or DMSE electronic position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X40TC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Delivers 1559 N of push force at 0.5 MPa to rapidly secure machining pallets, utilizing the TC trunnion mount to self-align with the fixture base during clamping.
Uses the compact 40 mm stroke to swiftly tuck packaging flaps on a high-speed cartoning line, with the smooth tie-rod-free barrel preventing debris accumulation.
Provides a fast, short-stroke knockout action in a stamping press, leveraging the adjustable air cushion to soften the impact of the 318 kgf maximum load at stroke end.
Selecting the SE63X40TC pairs a robust 63 mm bore with a short 40 mm stroke, making it optimal for brief, high-impact motions. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa. Conversely, if you need more power, stepping up to the 80 mm bore provides 2513 N of push at 0.5 MPa. Because this is a standard double-acting cylinder, it cannot hold a load in place if air pressure is lost or the directional valve is centered; the piston will drift. For suspended or gravity-loaded applications, consider an external pilot-operated check valve or the AirTAC BSE rod-lock variant.
This model uses a PT3/8 port and a Ø20 mm piston rod with an M16x1.5 thread. The standardized ISO 15552 mounting interface ensures the TC trunnion hardware is dimensionally interchangeable with other ISO 15552 profile cylinders, simplifying retrofits. Given the short 40 mm stroke, side-load stress on the rod bearing is minimal, but an external guide is still recommended if the load geometry induces twisting moments.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X40TC features a 63 mm bore and a PT3/8 port. At 0.5 MPa it generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N. The absolute maximum push force is 318 kgf when operating at 1.0 MPa.
Yes, the SE63X40TC is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and TC trunnion dimensions as other ISO 15552 profile cylinders. However, this specific SKU does not include a built-in magnet (-S), so it cannot host CMSE reed or DMSE electronic sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.