
The AirTAC SE63 Standard Cylinder SE63X420S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 420mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X420S is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard, delivering 1559 N of push force and 1402 N of pull force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing no protruding hardware.
Equipped with a built-in magnet (-S), this unit directly accepts AirTAC CMSE reed and DMSE electronic sensors in the three-sided integrated grooves. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration for the 420 mm travel, protecting payloads from hard mechanical impacts.
| Model | Airtac SE63 Standard Cylinder SE63X420S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 420 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×420 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives 420 mm diverting arms on packaging conveyor lines, utilizing the 1559 N push force to reliably shift heavy pallets into routing lanes.
Actuates secondary tool ejectors in machining centers, where the 36 mm cushion length smoothly decelerates the stroke to protect precision spindles.
Raises and lowers multi-tier storage rack gates, using the integrated -S magnet with DMSE electronic sensors to confirm fully open positions.
The 63 mm bore provides 1559 N push at 0.5 MPa; if your assembly requires less force, the 50 mm neighbor yields 982 N, while stepping up to the 80 mm bore provides 2513 N. Because this is a 420 mm stroke, the 20 mm rod and thread see amplified bending moments under side loads—always guide the load externally to prevent rod-bearing wear. As a standard ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing direct reuse of existing mounting hardware. Note that the air cushion only decelerates the piston near stroke end; it does not hold a load if air pressure is lost. For position holding, use a BSE rod lock.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The air supply connects via a PT3/8 port.
No, the adjustable air cushion only decelerates the piston near the stroke ends; it does not act as a brake. If the air supply is lost or exhausted, the piston will drift. For fail-safe load holding, use a BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.