verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X450S

The AirTAC SE63 Standard Cylinder SE63X450S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 450mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke450 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$139.08 $146.58Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X450S

The AirTAC SE63X450S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving three dedicated sensor grooves open for switch placement.

This specific 63 mm bore unit travels a 450 mm stroke and features a built-in magnet (-S) designed to trigger AirTAC CMSE reed and DMSE electronic sensors for precise end-of-travel confirmation. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune the deceleration of the 20 mm hard-chrome piston rod, softening impact forces during high-speed cycling.

Airtac SE63 Standard Cylinder SE63X450S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X450S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke450 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X450S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X450S Is Used

conveyor_belt

Pallet Divider Actuation

Separates heavy timber pallets on a packaging line, utilizing the 1559 N push force and 450 mm stroke to create distinct gaps for robotic arm insertion.

packaging

Case Erector Arm

Drives the folding mechanism on a continuous-flow carton erector, relying on the field-adjustable end cushions to absorb kinetic energy during 800 mm/s cycling.

factory

CNC Chip Conveyor Gate

Opens and closes a heavy diversion gate on a metalworking chip conveyor, using the built-in magnet to trigger DMSE sensors for confirmations before coolant flushing.

Is the Airtac SE63 Standard Cylinder SE63X450S the Right Cylinder?

When sizing this 63 mm bore class, evaluate your thrust requirements against its 1559 N push at 0.5 MPa. If your application demands less force, stepping down to the 50 mm bore yields 982 N of push, while stepping up to the 80 mm bore provides 2513 N of push. Because the SE63X450S uses a PT3/8 supply port and an M16x1.5 rod-end thread, it shares standardized ISO 15552 mounting hardware and footprint dimensions for seamless retrofits.

At a 450 mm stroke, the unsupported mass of the rod and piston assembly increases the risk of bearing bending under lateral loads; an external guide rail is strongly recommended to prevent side-load wear. Remember that a standard SE cylinder cannot hold a load if air pressure drops or the valve centers—the piston will drift—so integrate a BSE rod lock for fail-safe position holding.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X450S FAQ

The 63 mm bore generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes. The SE63X450S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting footprint and rod thread dimensions as competing ISO 15552 profile cylinders for direct replacement.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X450S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X450S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.