
The AirTAC SE63 Standard Cylinder SE63X450SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 450mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X450SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 1559 N of push force at 0.5 MPa and integrates a Viton (FKM) seal to withstand continuous operating temperatures up to 150 C, making it well-suited for hot molding or baking lines.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine cavities. Equipped with a built-in magnet (-S), it drives AirTAC CMSE reed and DMSE electronic position sensors seamlessly, while field-adjustable air cushions at both ends absorb kinetic energy near the 450 mm stroke limits.
| Model | Airtac SE63 Standard Cylinder SE63X450SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force and 450 mm stroke to eject hot plastic sheets from a thermoforming press, where the FKM Viton seal survives sustained 150 C ambient heat.
Diverts newly formed glass bottles on a cooling conveyor, relying on the extruded no-tie-rod profile to mount flush in tight machinery while handling extended stroke reach.
Acts as a precise stop gate for hot aluminum extrusions, using the DMSE electronic sensor to confirm position and the adjustable end cushions to soften high-speed impacts.
If your assembly requires less push force, stepping down to the 50 mm bore yields 982 N at 0.5 MPa; conversely, scaling up to the 80 mm bore provides 2513 N for heavier payloads. Because this 450 mm stroke exceeds 300 mm, the resulting side loads can induce rod-bearing bending—always incorporate an external guide to prevent premature wear. Remember that this cylinder relies on live air pressure to move and hold; if the air supply drops, the piston drifts, so integrate a BSE rod lock for fail-safe load holding.
As a true ISO 15552 cylinder, it provides a direct retrofit footprint matching other industry-standard profile cylinders. To configure a replacement, verify the 63 mm bore, 450 mm stroke, PT3/8 port, and your specific mounting accessory.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with an absolute maximum push capacity of 318 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders. The H code indicates a Viton (FKM) seal, extending the operating temperature range from -20 C up to 150 C for high-heat applications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.