verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X460SN

The AirTAC SE63 Standard Cylinder SE63X460SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 460mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke460 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$146.06 $153.56Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X460SN

The AirTAC SE63X460SN is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. It features a 63 mm bore and a 460 mm stroke, generating 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving the integrated sensor grooves fully accessible.

This unit includes a built-in magnet for CMSE reed and DMSE electronic position sensing, paired with NBR seals for reliable standard-temperature operation. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycles. The PT3/8 port and M16x1.5 rod thread provide robust pneumatic flow and mechanical connection for medium-duty automation.

Airtac SE63 Standard Cylinder SE63X460SN Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X460SN
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke460 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X460SN

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×460Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X460SN Is Used

conveyor_belt

Pallet Divert Gate

Actuates a routing flap on a 24V DC roller conveyor, using the 460 mm stroke to fully extend the diverter arm and guide pallets into a packaging lane.

precision_manufacturing

CNC Lathe Door

Slides a heavy machine tool safety door open and closed, leveraging the 1559 N push force to overcome guide rail friction and clear the work envelope.

package_2

Case Erector Arm

Drives the folding mechanism on a continuous motion carton erector, where the NBR seals handle filtered plant air and the adjustable cushion softens the rapid cycle stops.

Is the Airtac SE63 Standard Cylinder SE63X460SN the Right Cylinder?

Choosing this 63 mm bore gives you 1559 N of push at 0.5 MPa. If your load is lighter, stepping down to the 50 mm bore yields 982 N push, whereas upgrading to the 80 mm bore provides 2513 N for heavier resistance. Because the 460 mm stroke is substantial, the unsupported piston rod is prone to bending under lateral deflection; always use an external guide to prevent side-load damage to the rod bearing. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, sharing standard mounting hardware and footprint. Note that the adjustable cushion only decelerates the piston near stroke end and does not hold the load; if air pressure drops, the rod will drift, requiring a BSE rod lock for fail-safe positioning.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X460SN FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.

No. The SE63X460SN is a standard double-acting cylinder; its adjustable air cushions only decelerate the piston near the end of the stroke and act as neither a brake nor a lock. If you need to hold a load safely without live air pressure, you must add a BSE series pneumatic rod lock or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X460SN

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X460SN and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.