verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X485S

The AirTAC SE63 Standard Cylinder SE63X485S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 485mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke485 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$146.06 $153.56Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X485S

The AirTAC SE63X485S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding motion control. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force, driven through a PT3/8 port and a 20 mm hard-chrome rod. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.

Because this specific unit carries the -S option, it features a built-in magnet designed for seamless integration with AirTAC CMSE reed and DMSE electronic sensors. The field-adjustable pneumatic cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling.

Airtac SE63 Standard Cylinder SE63X485S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X485S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke485 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X485S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×485Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X485S Is Used

packaging

Carton Erector Flaps

Provides the 1559 N push force required to cleanly fold and seal large corrugated cardboard flaps during high-speed packaging line operations.

conveyor_belt

Pallet Divert Gate

Leverages the 485 mm stroke to extend a routing gate smoothly across a 600 mm wide conveyor, redirecting heavy product pallets.

factory

CNC Chip Blower

Uses the integrated -S magnet with DMSE sensors to trigger a 36 mm cushioned sweep, clearing metal chips from machining centers.

Is the Airtac SE63 Standard Cylinder SE63X485S the Right Cylinder?

If your application requires less force, stepping down to the 50 mm bore yields a 982 N push at 0.5 MPa, whereas stepping up to the 80 mm bore provides a 2513 N push. The 485 mm stroke on this 63 mm bore falls within the standard range, but at this length the unsupported piston rod is highly susceptible to bending under side loads; incorporating an external guide rail is strongly recommended to prevent premature rod-bearing wear. As a true ISO 15552 cylinder, it serves as a direct replacement sharing standardized mounting interfaces and dimensions. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load if air pressure is lost.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X485S FAQ

At 0.5 MPa, this 63 mm bore cylinder delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa.

Yes, the SE63X485S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface as other standard profile cylinders. You can swap it in directly using your existing mounting hardware.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X485S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X485S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.