
The AirTAC SE63 Standard Cylinder SE63X500H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X500H is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding thermal environments. It delivers a robust 1559 N push force at 0.5 MPa (2182 N at 0.7 MPa) across a 500 mm stroke. Because this specific SKU is built with an FKM (Viton) seal, it extends the standard operating temperature range up to 150 C, making it highly suitable for high-heat industrial processes.
Unlike traditional tie-rod designs, this unit utilizes a square extruded aluminum barrel without external tie rods. This profile not only resists corrosion but allows for flush mounting and easy integration of standardized ISO 15552 hardware. The cylinder features field-adjustable pneumatic cushioning at both ends, letting technicians fine-tune the end-of-stroke deceleration via a screw to eliminate hard impacts when cycling heavy loads at speed.
| Model | Airtac SE63 Standard Cylinder SE63X500H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 1559 N push force and 150 C Viton seal to reliably eject hot plastic parts from molding presses without degrading the FKM elastomer.
Employs the 500 mm stroke to push cured components out of industrial drying ovens, where the standard cylinder profile withstands ambient radiated heat up to 150 C.
Leverages the 2182 N push force at 0.7 MPa to feed or strip heavy steel blanks in stamping cells, relying on the adjustable end cushions to soften aggressive cycle impacts.
If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, while moving up to the 80 mm bore provides 2513 N for heavier payloads. This 63 mm bore configuration features a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and operates at speeds from 30-800 mm/s. As this unit has a 500 mm stroke, the extended rod length increases the risk of rod-bearing bending under lateral loads; utilizing an external guide rail is strongly recommended to prevent premature wear.
Being dimensionally interchangeable per ISO 15552, this cylinder serves as a direct replacement for other ISO 15552 cylinders, simplifying retrofits. Note that this specific SKU lacks the -S magnet option, meaning it is not wired for AirTAC CMSE or DMSE position sensors out of the box. Furthermore, the adjustable air cushion only decelerates the piston near the stroke ends; it is not a locking mechanism. If the application must hold a vertical load without live air pressure, a BSE rod lock variant or external pilot-operated check valve is required.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. Equipped with an FKM (Viton) seal, its operating temperature extends from -20 C up to 150 C.
No, the SE63X500H is a standard double-acting cylinder. The adjustable air cushion at both ends only decelerates the piston near the stroke end to prevent hard impacts; it does not function as a brake or lock. If position holding without live pressure is required, consider the AirTAC BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.