
The AirTAC SE63 Standard Cylinder SE63X500N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X500N is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It delivers a robust 1559 N push at 0.5 MPa, making it well-suited for mid-weight industrial actuation. This specific SKU uses an NBR seal for reliable pneumatic sealing in standard ambient conditions and lacks a position-sensing magnet.
Its square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The field-adjustable air cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speed.
| Model | Airtac SE63 Standard Cylinder SE63X500N |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the full 500 mm stroke and 1559 N push at 0.5 MPa to redirect heavy wooden pallets across transfer lines without stalling under friction.
Relies on the NBR seal and adjustable pneumatic cushioning to smoothly extend and fold heavy cardboard flaps at high cycle rates.
Pushes metal sheet blanks into a press brake with precise 63 mm bore force, where the tie-rod-free profile allows tight side-by-side mounting.
When sizing this 63 mm bore, compare its 1559 N push at 0.5 MPa against the smaller 50 mm bore (982 N push) or the larger 80 mm bore (2513 N push) to step up or down for your load. Because this SKU omits the -S magnet, it cannot host AirTAC CMSE or DMSE position sensors without modifying the piston. As a standard ISO 15552 profile cylinder, it serves as a direct replacement for any equivalent ISO 15552 body sharing the 63 mm footprint, PT3/8 ports, and standard mounting accessories.
With a 500 mm stroke, the Ø20 mm rod and its bearing face increased bending moments under side loads. Even though the M16x1.5 rod thread handles high axial stress, you should use an external guide rail to prevent rod deformation and premature seal wear on long extensions.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, a standard double-acting SE cylinder cannot hold a load without live air pressure. The adjustable air cushion at both ends only decelerates the piston near the stroke end; it does not function as a brake. For dead-load holding, consider a BSE rod-lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.