
The AirTAC SE63 Standard Cylinder SE63X570S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 570mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X570S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, making it well-suited for mid-range actuation tasks. The square extruded aluminum barrel lacks external tie rods, which keeps the body compact, resistant to corrosion, and easy to mount flush against machine frames.
This specific unit includes a built-in magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, providing reliable end-of-stroke detection. It features field-adjustable air cushioning at both ends to decelerate the piston smoothly, and its standardized ISO 15552 mounting interface ensures dimensional interchangeability with other compliant cylinders.
| Model | Airtac SE63 Standard Cylinder SE63X570S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force and 570 mm travel needed to open and fold corrugated cardboard blanks on high-speed packaging lines.
Uses the built-in magnet for DMSE sensor feedback to confirm retraction before pallets pass on a 24V conveyor accumulation zone.
Extends 570 mm to safely strip stamped metal parts from a press bed, relying on adjustable end cushions to soften hard mechanical stops.
If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, while moving up to the 80 mm bore provides 2513 N. Because this is a 570 mm stroke, the unsupported rod length increases the risk of side-load bending on the rod bearing; an external guide is recommended to prevent premature wear. As a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered, so a BSE rod lock is needed for strict position holding. To retrofit this exact model, match the 63 mm bore, 570 mm stroke, PT3/8 port, and the -S magnet specification.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X570S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting footprint and interface as other compliant cylinders. You can use your existing mounting hardware and easily pair the built-in magnet with AirTAC CMSE or DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.