verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X600SN

The AirTAC SE63 Standard Cylinder SE63X600SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke600 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$161.41 $168.91Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X600SN

The AirTAC SE63X600SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It generates 1559 N of push force at 0.5 MPa and features a 600 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.

This specific configuration includes a built-in magnet for CMSE reed and DMSE electronic position sensors, alongside an NBR seal for standard temperature duties. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed 600 mm traverses.

Airtac SE63 Standard Cylinder SE63X600SN Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X600SN
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke600 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X600SN

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×600Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X600SN Is Used

conveyor_belt

Pallet Transfer Line Diverter

Uses the 1559 N push force to deflect heavy timber pallets onto a side spur track, relying on the 600 mm stroke to clear the main conveyor width.

packaging

Corrugated Box Flap Folder

Extends 600 mm to fold large outer flaps on industrial carton erectors, where the NBR seal handles continuous daily cycling at moderate speeds.

factory

CNC Lathe Bar Feeder

Pushes raw hexagonal bar stock through the spindle, utilizing the built-in magnet with DMSE solid-state sensors to confirm material injection position.

Is the Airtac SE63 Standard Cylinder SE63X600SN the Right Cylinder?

Selecting this 63 mm bore unit makes sense when 50 mm cylinders (providing 982 N push at 0.5 MPa) lack thrust, but an 80 mm bore (2513 N push at 0.5 MPa) would introduce unnecessary physical bulk and air consumption. The 600 mm stroke is a standard ISO length, but at this extension the Ø20 mm rod and its bearing face substantial bending moments; an external guide rail is strongly recommended to prevent premature seal wear from side loads.

For retrofitting, this cylinder is dimensionally interchangeable with any ISO 15552 profile cylinder, matching the 63 mm bore, 600 mm stroke, PT3/8 port, and standard mounting footprint. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load; if your application loses air pressure, the rod will drift unless a BSE rod lock is installed.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X600SN FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE63X600SN shares the exact ISO 15552 mounting interface and dimensions, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders. The built-in magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors, and the PT3/8 ports match standard global pneumatic plumbing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X600SN

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X600SN and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.