verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X75SH

The AirTAC SE63 Standard Cylinder SE63X75SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 75mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke75 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$99.32 $106.82Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X75SH

The AirTAC SE63X75SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous thermal environments. By specifying the H seal option, this unit utilizes high-temperature FKM (Viton) elastomers that reliably operate from -20 to 150 C, far exceeding standard TPU temperature limits. It yields a robust 1559 N push and 1402 N pull at 0.5 MPa, making it well-suited for mid-range industrial actuation.

Its square extruded aluminum barrel eliminates external tie rods, resulting in a compact, corrosion-resistant body that mounts flush against machine frames. The integrated S magnet enables direct position sensing with AirTAC CMSE reed or DMSE electronic switches fitted into the multiple sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration, preventing harsh mechanical impacts during high-speed cycling.

Airtac SE63 Standard Cylinder SE63X75SH Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X75SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke75 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X75SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X75SH Is Used

science

Thermoforming Mold Clamping

Clamps heated plastic sheet molds with 1559 N of thrust at 0.5 MPa, where the Viton FKM seals survive ambient radiant heat up to 150 C without degrading.

packaging

Hot-Melt Adhesive Dispensing

Actuates the 75 mm stroke for precise adhesive gun positioning over fast-moving packaging lines, using the S magnet to trigger DMSE sensors for cycle timing.

factory

Woodworking Press Ejection

Ejects laminated panels from high-temperature presses, relying on the adjustable end cushions to soften the 75 mm stroke impact during rapid 30-800 mm/s ejection.

Is the Airtac SE63 Standard Cylinder SE63X75SH the Right Cylinder?

Selecting this 63 mm bore makes sense when a 50 mm cylinder (offering 982 N push at 0.5 MPa) lacks the necessary thrust, but an 80 mm unit (providing 2513 N push) would be physically oversized. The 75 mm stroke provides quick, precise extension without consuming excessive axial envelope space. Because this configuration includes the S magnet, it is immediately ready for DMSE electronic or CMSE reed position feedback.

As a standard double-acting actuator, the SE63X75SH relies on continuous air pressure to maintain its load; it will drift if supply is lost or the valve centers, so applications requiring true fail-safe holding must utilize a BSE rod lock variant. Dimensionally interchangeable with all ISO 15552 cylinders, it serves as a direct replacement for existing 63 mm bore hardware using standard PT3/8 ports and matching mounting accessories.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X75SH FAQ

This 63 mm bore cylinder delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Thanks to the H seal option, it operates in temperatures up to 150 C, with a speed range of 30-800 mm/s and a PT3/8 port.

Yes, the SE63X75SH is dimensionally interchangeable with any standard ISO 15552 / VDMA 24562 profile cylinder. You can drop it into existing 63 mm bore setups using the same mounting hardware and PT3/8 port locations. The adjustable end cushions and built-in magnet for CMSE/DMSE sensors allow it to seamlessly match the performance of legacy equipment.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X75SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X75SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.