verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X800H

The AirTAC SE63 Standard Cylinder SE63X800H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke800 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$200.96 $208.46Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X800H

The AirTAC SE63X800H is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding high-temperature environments. Utilizing a Viton (FKM) seal, it withstands operating temperatures up to 150 C, making it highly suitable for ovens, foundries, and thermal processing equipment. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force.

Built with an extruded aluminum barrel, this profile cylinder eliminates external tie rods, offering a compact, corrosion-resistant body that mounts flush against machinery. The field-adjustable air cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration via a set screw, softening hard impacts during its 800 mm travel. Note that this specific SKU lacks a built-in position magnet, so it is not wired for CMSE or DMSE electronic sensing out of the box.

Airtac SE63 Standard Cylinder SE63X800H Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X800H
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke800 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X800H

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X800H Is Used

factory

Foundry Ejection

Survives 150 C ambient heat near aluminum die-casting machines to eject heavy 1559 N cast parts over an 800 mm stroke.

conveyor_belt

Tire Press Transfer

Handles the high thermal load of rubber curing presses, moving green tires through an 800 mm travel distance.

sync_alt

Packaging Sealer

Drives heavy sealing jaws in high-temperature shrink-wrap tunnels where standard TPU seals would rapidly degrade.

Is the Airtac SE63 Standard Cylinder SE63X800H the Right Cylinder?

Stepping down to a 50 mm bore reduces the 0.5 MPa push force to 982 N, whereas moving up to an 80 mm bore increases it to 2513 N, letting you match the exact load requirement. Because this is an 800 mm stroke, the 20 mm rod and bearing are subject to bending moments under heavy lateral loads; an external guide rail is strongly recommended to prevent premature wear. Remember that the adjustable air cushion only decelerates the piston near stroke end—it does not hold a load. If your application requires position holding without live air pressure, consider the BSE rod lock variant. For ISO 15552 retrofits, match the 63 mm bore, 800 mm stroke, PT3/8 port, and mounting hardware for a seamless direct replacement.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X800H FAQ

At 0.5 MPa, the 63 mm bore provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.

Yes, the SE63X800H is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing ISO 15552 mounting hardware. It features a PT3/8 port, a 20 mm rod, and a high-temperature Viton (FKM) seal rated for 150 C.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X800H

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X800H and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.