verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X800N

The AirTAC SE63 Standard Cylinder SE63X800N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke800 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$187.47 $194.97Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X800N

The AirTAC SE63X800N is a double-acting single-rod ISO 15552 profile cylinder, delivering a robust 1559 N push and 1402 N pull at 0.5 MPa. It features an 800 mm stroke and a 63 mm bore, utilizing a PT3/8 port and a 20 mm rod with an M16x1.5 thread. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from shop-floor debris.

This specific SKU incorporates an NBR seal for standard pneumatic duties and operates without a built-in position sensor magnet. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune deceleration via a screw, softening hard end stops when cycling heavy loads at speed. The standardized ISO 15552 / VDMA 24562 mounting interface ensures strict dimensional interchangeability with other ISO 15552 cylinders, streamlining procurement and retrofits.

Airtac SE63 Standard Cylinder SE63X800N Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X800N
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke800 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X800N

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X800N Is Used

conveyor_belt

Pallet Transfer Gate

Actuates a diverting gate on a 1.5 m pallet conveyor, using the 1559 N push force to redirect heavy timber pallets onto a secondary packaging line.

straighten

Press Brake Backgauge

Positions the X-axis backgauge finger on a sheet metal press brake, where the 800 mm stroke accommodates deep-forming operations and the NBR seal resists shop-floor lubricants.

warehouse

Vertical Lift Station

Drives a vertical tote lifting platform in an automated storage and retrieval system, relying on adjustable end-cushions to decelerate the 1402 N retract load smoothly at the top stop.

Is the Airtac SE63 Standard Cylinder SE63X800N the Right Cylinder?

Selecting this 63 mm bore makes sense when your load requires the 1559 N push force at 0.5 MPa. If your application is lighter, stepping down to the 50 mm bore yields 982 N of push, whereas moving up to the 80 mm bore provides 2513 N for heavier masses. Keep in mind that a standard SE cylinder will drift if air pressure is lost or the valve is centered; for fail-safe load holding, consider the BSE rod-lock variant or an external pilot-operated check valve.

At an 800 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads, so mounting this cylinder requires an external guide to prevent rod-bearing damage. Furthermore, because this model lacks the -S magnet code, it cannot host CMSE or DMSE position sensors out of the box; if end-of-stroke signaling is required, you must select an SE63X800S variant instead.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X800N FAQ

This 63 mm bore cylinder generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.

Yes. The SE63X800N is strictly dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing foot or flange mounts designed for other ISO 15552 profile cylinders without modifying the machine frame.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X800N

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X800N and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.