verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X800TC

The AirTAC SE63 Standard Cylinder SE63X800TC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke800 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$264.24 $271.74Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X800TC

The AirTAC SE63X800TC is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, peaking at a 318 kgf maximum push at 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush while protecting the pneumatic internals.

This 800 mm stroke variant utilizes a PT3/8 port and a Ø20 mm rod with an M16x1.5 thread. It features field-adjustable air cushioning at both ends to decelerate the piston smoothly near stroke limits. Note that this SKU lacks a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing without modification.

Airtac SE63 Standard Cylinder SE63X800TC Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X800TC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke800 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X800TC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×800Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X800TC Is Used

conveyor_belt

Pallet Transfer Line Diverter

Uses the 1559 N push force at 0.5 MPa and 800 mm stroke to deflect heavy pallets onto adjacent roller conveyors without overwhelming the framework.

factory

Automated Press Ejection

Leverages the TC trunnion mount to pivot and clear stamped metal parts from a press bed, utilizing the 36 mm cushion length to soften the hard end stop.

straighten

Long-Stroke Material Straightener

Applies the 1402 N pull force at 0.5 MPa to tension and align long extruded profiles, relying on the ISO 15552 interface for seamless machine integration.

Is the Airtac SE63 Standard Cylinder SE63X800TC the Right Cylinder?

Selecting this 63 mm bore makes sense when 50 mm cylinders (providing 982 N push at 0.5 MPa) lack the power to move your load, but an 80 mm bore (delivering 2513 N push at 0.5 MPa) would be physically oversized. The TC centre trunnion mounting is specifically beneficial for pivoting an 800 mm stroke, as it supports the cylinder body mid-span to reduce sagging. Because the stroke is 800 mm, the unsupported rod length during extension creates a high bending moment on the rod bearing; an external guide is strongly recommended to prevent side-load damage. Remember that the adjustable air cushion only decelerates the piston near the end of travel—it does not lock or hold the load if air pressure is lost. For position holding, consider a BSE rod lock variant.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X800TC FAQ

At 0.5 MPa, the SE63X800TC delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf when operated at 1.0 MPa.

Yes, it is dimensionally interchangeable per ISO 15552, allowing it to direct replace other ISO 15552 profile cylinders using standard mounting hardware. However, this specific SKU lacks the -S magnet, so it cannot support AirTAC CMSE or DMSE position sensors without adding a magnet.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X800TC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X800TC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.