
The AirTAC SE63 Standard Cylinder SE63X850S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 850mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X850S is a double-acting single-rod ISO 15552 profile cylinder engineered for a non-standard 850 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa and 2182 N at 0.7 MPa, making it well-suited for long-travel actuation tasks requiring substantial thrust. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine envelopes.
This specific configuration includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. To manage kinetic energy at the end of its lengthy travel, the cylinder features field-adjustable pneumatic air cushioning at both ends, allowing technicians to tune end-stop deceleration precisely to the load. The PT3/8 port and M16x1.5 rod thread are standardized to the 63 mm bore ISO interface.
| Model | Airtac SE63 Standard Cylinder SE63X850S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 850 mm stroke and 1559 N push force to index heavy wooden pallets between machining cells on a roller conveyor system.
Leverages the extended 850 mm travel to simultaneously fold and square oversized corrugated cardboard flaps on automated case erecting lines.
Employs the -S magnet with DMSE sensors for mid-stroke positioning of a vertical lifting gantry in automated storage and retrieval systems.
When sizing this 63 mm bore actuator, compare its 1559 N push at 0.5 MPa against your actual load requirements. If your application demands less thrust, stepping down to the 50 mm bore yields 982 N of push force, saving space and air consumption. Conversely, if you need greater power, stepping up to the 80 mm bore provides 2513 N. Because this is a plain double-acting cylinder, it will drift if air pressure is lost or the valve is centered; applications requiring static load holding without live pressure should integrate an external rod lock or evaluate the BSE variant.
At an 850 mm stroke, the unsupported piston rod is highly susceptible to side-loading and bending forces. To prevent premature guide-bearing wear and seal failure, it is critical to use an external guide rail to support the load rather than relying on the cylinder rod itself. This unit is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 profile cylinders sharing the same 63 mm bore, 850 mm stroke, PT3/8 port, and mounting footprint.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X850S generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke ends and does not act as a locking mechanism. If air pressure is lost or the directional valve is centered, the cylinder will drift. For fail-safe load holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.