verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X880S

The AirTAC SE63 Standard Cylinder SE63X880S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 880mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke880 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$207.48 $214.98Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X880S

The AirTAC SE63X880S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a non-standard 880 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 20 mm hard-chrome piston rod and a PT3/8 port. Because the stroke exceeds the standard 800 mm limit for this bore, it is produced as a made-to-order unit for specialized long-reach machinery.

This actuator features a square extruded aluminum barrel without external tie rods, making it highly corrosion-resistant and easy to mount flush against machine frames. The integrated -S magnet allows seamless positioning feedback via AirTAC CMSE reed and DMSE electronic sensors. Field-adjustable air cushions at both ends let you precisely tune end-of-stroke deceleration to protect long-travel payloads.

Airtac SE63 Standard Cylinder SE63X880S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X880S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke880 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X880S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×880Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X880S Is Used

conveyor_belt

Pallet Transfer Pusher

Uses the 1559 N push force at 0.5 MPa to index heavy wooden pallets along a roller conveyor over a long 880 mm travel distance.

package_2

Large Carton Erector

Deploys the extended 880 mm stroke to open and square oversized corrugated packaging boxes before the folding sequence.

straighten

Metal Sheet Stacker

Leverages the adjustable end cushions to gently decelerate the 20 mm rod when stacking heavy gauge sheet metal blanks.

Is the Airtac SE63 Standard Cylinder SE63X880S the Right Cylinder?

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force. If your application requires less thrust, the neighboring 50 mm bore provides 982 N push, while stepping up to the 80 mm bore yields 2513 N push for heavier loads. Because this is an 880 mm stroke, the unsupported rod length during full extension is substantial; always use an external guide to prevent rod-bearing bending and premature seal wear under side loads.

As a standard ISO 15552 profile cylinder, the SE63X880S is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing mounting hardware like FA front flanges or TC center trunnions. Note that this plain double-acting cylinder does not hold position when air is exhausted; if your process requires static load holding without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X880S FAQ

The SE63X880S provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.

No, the adjustable air cushion at both ends only decelerates the piston near the stroke end and is not a locking mechanism. The cylinder will drift if air is lost. For true load holding, use a BSE rod lock cylinder or an external rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X880S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X880S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.