
The AirTAC SE63 Standard Cylinder SE63X900H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 900mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X900H is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 1559 N of push force at 0.5 MPa and features a 900 mm stroke. Because this SKU uses a Viton (FKM) seal, the operating temperature range extends up to 150 C, making it highly suitable for hot stamping or drying processes where standard TPU seals would fail.
The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against frames. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts at high cycling speeds. Note that this specific configuration does not include a position-sensing magnet, so it operates without CMSE or DMSE switches out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X900H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles 1559 N push at 0.5 MPa to actuate stamping dies in heated environments, relying on the FKM Viton seal to withstand 150 C ambient temperatures without degrading.
Moves heavy fabricated parts through a 900 mm stroke inside a drying oven, utilizing the field-adjustable air cushions to prevent jarring stops at high speeds.
Shifts loaded pallets along a processing line where the square profile barrel mounts flush to the machine frame, saving valuable real estate in tight cells.
If your application requires less thrust, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas stepping up to the 80 mm bore provides 2513 N. Remember that a standard SE cylinder does not hold its load if air pressure drops; if you need mid-stroke holding or drop protection, look to the BSE rod-lock variant. At 900 mm of unsupported stroke, the 20 mm rod and M16x1.5 thread face significant bending moments under side loads, so an external guide rail is strongly recommended to prevent premature seal wear. As a true ISO 15552 profile cylinder, it drops directly into existing mounts built for standardized VDMA 24562 dimensions, using a PT3/8 port.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push force of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, it is dimensionally interchangeable with any ISO 15552 profile cylinder footprint. Furthermore, the H designation indicates a Viton (FKM) seal, extending the operating temperature range from -20 C up to 150 C, ideal for high-thermal-duty applications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.