
The AirTAC SEJ Adjustable Cylinder SEJ50X100-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 90–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X100-10 is a double-acting, double-rod ISO 15552 profile cylinder with a 10mm adjustable stroke window. You can dial the retract end from 90 to 100mm, letting you fine-tune the end position on the machine without swapping hardware.
This 50mm bore unit runs on PT1/4 ports and features a Ø20mm rod with an M16x1.5 thread. Adjustable air cushions at both ends absorb kinetic energy near stroke end. This SKU omits the magnet, so it does not support CMSE or DMSE position sensors. The extruded aluminum barrel ensures ISO 15552 dimensional interchangeability with no external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X100-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 10 mm (90–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10mm retract window to set exact gripper jaw depth on packaging lines, using the 825N both-way force to clamp cartons securely.
Adjust the 90-100mm effective stroke on the fly to accommodate different bottle heights on a filling machine without changing cylinder mounts.
Verify the 10mm adjustment window covers your required positioning range. If you need less force, the 40mm bore provides 528N both ways at 0.5 MPa; if you need more, step up to the 63mm bore for 1402N. If your end position is fixed and never changes, a standard SED double-rod cylinder provides the same equal-force dynamics without the adjustment hardware.
This cylinder does not hold position on air loss; the adjustable stop screw and air cushions only set the mechanical end and decelerate the load. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 unit, match the 100mm nominal stroke, PT1/4 port, and your required mounting style from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 10mm. The effective stroke range is 90 to 100mm. You dial it in during commissioning and lock it once the end position is set.
Because it is a double-rod cylinder, force is equal in both directions. It provides 825N at 0.5 MPa, 1154N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.