
The AirTAC SEJ Adjustable Cylinder SEJ50X100-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 80–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X100-20 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A stop screw on the back rod lets you dial the end position within a 20 mm window, yielding an effective stroke range of 80-100 mm. This eliminates machining custom spacers when fine-tuning a stop on the machine.
Because a rod exits both ends, the annular area is identical in both directions. It features field-adjustable air cushions at both ends to decelerate the load near stroke end. This SKU has no magnet, so it will not work with CMSE or DMSE position sensors without adding one.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X100-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 20 mm (80–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20 mm retract window to hit a precise 90 mm stop, using the equal 825 N both-way force to seat a delicate membrane without crushing it.
Quickly shift the effective stroke from 80 to 100 mm to accept different carton heights, locking the back-rod stop screw once the format is set.
Trial various end positions on a test rig within the 80-100 mm range, relying on the adjustable air cushion to protect the 30 mm cushion stroke at high speed.
Confirm the 20 mm adjustment window covers your required end-position variance. If you need less force, the 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, step up to the 63 mm bore for 1402 N. If your end position never changes, a fixed-stroke SED50X100 saves cost and overall length.
This plain SEJ does not hold position on air loss—the cushion and stop screw only set the mechanical end and decelerate the load, so use a BSED or external rod lock for fail-safe holding. For a true ISO 15552 replacement, match the 50 mm bore, 100 mm stroke, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The back-rod stop screw provides a 20 mm adjustment window. The effective retract stroke can be dialed down from the 100 mm nominal stroke to 80 mm, then locked in place.
Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.