verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X100-40S

The AirTAC SEJ Adjustable Cylinder SEJ50X100-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 60–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke100 mm
  • Adjust window40 mm
  • Effective stroke60–100 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$97.21 $104.71Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X100-40S

The AirTAC SEJ50X100-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so that extend and retract forces match exactly at 825 N each way at 0.5 MPa. The rear rod incorporates a mechanical stop screw, letting you dial the retract stroke down from the 100mm nominal to a 60mm minimum for precise on-machine commissioning.

Fitted with a magnet (-S) for CMSE reed or DMSE electronic sensors, this extruded-aluminum profile cylinder omits external tie rods for a clean ISO 15552 dimensionally interchangeable envelope. It includes field-adjustable air cushions at both ends to manage deceleration over the 30mm cushion length. The PT1/4 porting and M16x1.5 rod-end thread mate with standard pneumatic infrastructure.

Airtac SEJ Adjustable Cylinder SEJ50X100-40S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X100-40S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke100 mm
Adjustment window40 mm (60–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X100-40S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×100Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X100-40S Is Used

straighten

Press Stroke Tuning

Dial the 40mm window to perfectly set the 60-100mm clamping reach on a light-duty assembly press, matching varying part thicknesses with 825 N of both-way force.

swap_horiz

Conveyor Changeover

Adjust the retract position on the fly when a packaging line switches box sizes, using the equal push and pull forces to actuate a diverter gate smoothly.

tune

Trial Positioning

Fine-tune the end stop during machine commissioning to find the exact ejection point for a delicate electronic component, then lock the stop screw in place.

Is the Airtac SEJ Adjustable Cylinder SEJ50X100-40S the Right Cylinder?

This 50mm bore suits applications needing 825 N of both-way force at 0.5 MPa. If your variable stop requires less thrust, step down to the 40mm bore (528 N); if pushing heavier fixtures, step up to the 63mm bore (1402 N). If your end position never changes, a fixed-stroke SED cylinder is sufficient. The stop screw only sets the mechanical end and decelerates near stroke end; it is not a lock. For fail-safe position holding on air loss, use an external rod lock.

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X100-40S FAQ

A mechanical stop screw on the back rod lets you dial the retract stroke down by up to 40mm. This creates an effective stroke range of 60 to 100mm, which you set during commissioning and then lock in place.

Because it is a double-rod cylinder, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X100-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X100-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.