verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ50X100-50

The AirTAC SEJ Adjustable Cylinder SEJ50X100-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ50 mm
  • Nominal stroke100 mm
  • Adjust window50 mm
  • Effective stroke50–100 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$93.48 $100.98Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ50 stroke, mounting and version on one page All SEJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ50X100-50

The AirTAC SEJ50X100-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A back-rod stop screw lets you dial the retract end from 50 mm up to the 100 mm nominal stroke, so one unit covers a variable end-position range without swapping hardware.

This 50 mm bore extruded aluminum barrel omits external tie rods and runs at 30-800 mm/s. It carries field-adjustable air cushions at both ends to tune deceleration near stroke end. This SKU has no magnet (-S omitted), so it will not host CMSE or DMSE sensors without modification. The retract stop screw sets the mechanical end; it is not a lock and will not hold position on air loss.

Airtac SEJ Adjustable Cylinder SEJ50X100-50 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ50X100-50
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ50 mm
Nominal stroke100 mm
Adjustment window50 mm (50–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressureForce (both directions)
0.5 MPa825 N
0.7 MPa1155 N
Max (@1.0 MPa)168 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ50X100-50

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
50Bore size in mm.
×100Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ50X100-50 Is Used

tune

Press Feed Dial-In

Fine-tune the exact 50-100 mm feed depth on a stamping press to match material thickness variations, using the 825 N both-way force to push the feed head.

swap_horiz

Packaging Changeover

Adjust the retract stroke on the fly when switching a carton sealer to different box heights, locking the back-rod stop screw after setting the new end position.

precision_manufacturing

Trial Spot Welding

Dial in electrode positioning during robotic spot welding commissioning, moving the 50 mm window to find the precise contact point before finalizing the fixture.

Is the Airtac SEJ Adjustable Cylinder SEJ50X100-50 the Right Cylinder?

Verify the 50 mm adjustment window covers your variable-stop requirement; the effective range is 50 to 100 mm. If you need less fine-tuning, a fixed-stroke SED saves cost. For sizing both ways: stepping down to a 40 mm bore yields 528 N each way at 0.5 MPa, while stepping up to a 63 mm bore provides 1402 N. This 50 mm unit delivers 825 N both ways at 0.5 MPa, 1154 N at 0.7 MPa, and maxes at 168 kgf. For fail-safe load holding on air loss, use an external rod lock or BSED, as the cushion and stop screw only set the mechanical end. When replacing an ISO 15552 cylinder, match the 50 mm bore, PT1/4 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2—no FB/CA/CB/CR).

AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ50X100-50 FAQ

The 50 mm adjustment window lets you mechanically dial the retract end from a 50 mm effective stroke up to the 100 mm nominal stroke. You set the exact end position using the back-rod stop screw, then lock it in place.

Because the rod exits both ends, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ50X100-50

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ50X100-50 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.