
The AirTAC SEJ Adjustable Cylinder SEJ50X100-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø50mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X100-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end from 50mm up to the 100mm nominal, yielding an effective stroke of 50-100mm for exact machine commissioning.
This extruded-aluminum barrel omits external tie rods for a clean ISO 15552 interchange. It carries an -S magnet for CMSE reed or DMSE electronic sensors, and field-adjustable air cushions at both ends to decelerate the load near stroke end. The back rod can also mount a cam or flag for external sequencing.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X100-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50mm retract window to set precise bending angles up to 100mm, using the equal 825 N both-way force to consistently position the back gauge.
Quickly alter the retract end from 50 to 100mm when switching carton sizes, letting the double-rod maintain identical push and pull speeds without changing hardware.
Fine-tune the exact seating depth of a bearing on a trial basis, locking the back-rod stop screw once the 825 N clamping position is proven.
Verify the 50mm adjustment window covers your required end-position range; here you can tune the retract stroke anywhere from 50 to 100mm. If you need less force, the adjacent 40mm bore provides 528 N both ways at 0.5 MPa; if your load is heavier, step up to the 63mm bore for 1402 N. If you do not need on-machine adjustability, a fixed-stroke SED saves length and cost. Note that a plain SEJ does not hold position on air loss—the stop screw and cushions set the mechanical end and decelerate, but for fail-safe holding you need a BSED or external rod lock. When replacing an ISO 15552 cylinder, match the 50mm bore, 100mm nominal stroke, 50mm window, PT1/4 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 50mm adjustment window lets you mechanically shorten the retract stroke down from the 100mm nominal. The effective stroke range is 50 to 100mm, set via a stop screw on the back rod that you lock after positioning.
Because the rod exits both ends, force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.