
The AirTAC SEJ Adjustable Cylinder SEJ50X100-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø50mm unit covers an effective stroke of 25–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X100-75S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable stroke. A rod exits both ends, yielding equal annulus areas and an output force of 825 N each way at 0.5 MPa. The retract end features a mechanical stop screw that shortens the stroke over a 75 mm window, giving an effective travel range of 25-100 mm for precise machine commissioning.
Because the rod protrudes from both the cap and head ends, you get identical extend and retract forces without the uneven dynamics of a single-rod unit. The extruded aluminum barrel contains no external tie rods, and the included -S magnet enables position detection with CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both ends decelerate the load near stroke end, while the PT1/4 ports match the 50 mm bore standard.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X100-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 75 mm (25–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 25-100 mm insertion depth for bearing press fits. The equal 825 N both-way force ensures consistent retract pull, preventing tool binding.
Switch between different pallet heights without swapping hardware. The 75 mm retract window adapts the stop precisely, while the 50 mm bore delivers 1154 N at 0.7 MPa.
Set mechanical end positions for delicate component seating. The back-rod stop screw locks the 25-100 mm travel, and the double-rod design resists rotation for guided tooling.
This 50 mm bore fits applications needing 825 N (0.5 MPa) of both-way force. If you need less clamping power, step down to the 40 mm bore for 528 N; if your fixture requires more push, step up to the 63 mm bore for 1402 N. The 75 mm adjustment window is ideal for prototyping or matching variable part heights, but if your end position never changes, a fixed-stroke SED provides the same stability without the back-rod mechanism.
For any positioning task, remember that this cylinder does not hold position on air loss—the adjustable cushion and stop screw only set the mechanical end and decelerate the load, serving as a brake failsafe requires an external rod lock. As a dimensionally interchangeable ISO 15552 cylinder, you can drop it into existing setups matching the 100 mm stroke, 75 mm window, PT1/4 ports, and your choice of Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract stroke is adjustable over a 75 mm window via a stop screw on the back rod. The effective stroke range is 25-100 mm, allowing you to fine-tune the end position on the machine without changing hardware.
Because the rod exits both ends, the force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.