
The AirTAC SEJ Adjustable Cylinder SEJ50X120-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 90–120mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X120-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, yielding equal force in both directions at about 825 N each way at 0.5 MPa. You can dial the retract end from 90 mm up to the nominal 120 mm.
A stop screw on the back rod mechanically sets the end position, allowing you to fine-tune the machine stop on-site without swapping hardware. The extruded aluminum barrel omits external tie rods, and the included -S magnet enables position detection with CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X120-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 120 mm |
| Adjustment window | 30 mm (90–120 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Adjust the retract stop on the fly when switching between different box heights on a packaging line, using the back-rod screw to match the new flap-folding position.
Act as an adjustable physical stop for parts on a conveyor, fine-tuning the 90-120 mm gate position to align varying product widths precisely.
Verify the 30 mm adjustment window covers your required end-position range. If you need less force, the adjacent 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more, stepping up to the 63 mm bore yields 1402 N. If the exact stroke is fixed and never changes, a standard SED double-rod cylinder is sufficient.
This cylinder does not hold position on air loss; the adjustable air cushion and stop screw only decelerate the piston and set the mechanical end. For fail-safe holding, use an external rod lock. As an ISO 15552 cylinder, it dimensionally matches standard 50 mm bores, but confirm your port (PT1/4), mounting (Basic, FA, LB, TC, FTC, TCM1, or TCM2), and sensor requirements.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 30 mm. The effective stroke range is 90 mm to 120 mm. You set the exact end position on the machine and lock it down, meaning one cylinder covers a range of fine-tune stops without changing hardware.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.