
The AirTAC SEJ Adjustable Cylinder SEJ50X120-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø50mm unit covers an effective stroke of 80–120mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X120-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end position, yielding an effective stroke range of 80 to 120 mm without changing hardware.
This bore 50 mm variant features a PT1/4 port, a Ø20 mm rod with an M16x1.5 thread, and 30 mm adjustable air cushions at both ends. The built-in magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. The extruded aluminum barrel provides ISO 15552 dimensional interchangeability with no external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X120-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 120 mm |
| Adjustment window | 40 mm (80–120 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 80-120 mm pressing depth on an assembly fixture. The equal 825 N both-way force ensures consistent clamping pressure on extend and retract.
Accommodate different workpiece heights on a conveyor transfer station. Adjust the 40 mm retract window on the fly without swapping out the entire cylinder.
Fine-tune the end-of-stroke stop during machine commissioning. The Ø20 mm rod and M16x1.5 thread provide a stable platform for mounting external cams.
Verify the 40 mm adjustment window covers your required end-position variance; this 50 mm bore outputs 825 N both ways at 0.5 MPa. If you need less force, the neighboring 40 mm bore provides 528 N; if you need more, step up to the 63 mm bore for 1402 N. If your machine requires a fixed end position with no variance, a standard SED double-rod cylinder is sufficient.
Note that the adjustable stop screw and air cushions only set the mechanical end and decelerate the piston; they do not hold position on air loss. For fail-safe holding, specify an external rod lock. Ensure your ISO 15552 replacement matches the 120 mm stroke, PT1/4 port, and desired mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 40 mm window. This allows the effective stroke to be dialed from 80 mm up to 120 mm, which is ideal for fine-tuning end positions during machine commissioning. The screw is locked in place once the desired position is set.
Because it is a double-rod cylinder, the force is identical in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa. The equal force is due to the symmetrical annulus area created by the rod exiting both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.