
The AirTAC SEJ Adjustable Cylinder SEJ50X125-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 25–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X125-100 is a double-acting, double-rod ISO 15552 profile cylinder with a 100mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force stays equal in both directions at about 825 N each way at 0.5 MPa. The retract stroke dials precisely from 25mm up to the nominal 125mm.
You tune the end position mechanically via a stop screw on the back rod, then lock it down—ideal for dialing in a precise stop during machine commissioning without swapping hardware. This extruded aluminum barrel omits external tie rods entirely, and because this SKU lacks the magnet option, it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X125-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 100 mm (25–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Test multiple pick-and-place end points for a 50mm bore assembly station, fine-tuning the mechanical stop screw to find the optimal transfer location.
Verify the 100mm adjustment window covers your required positioning range, letting you drop the effective stroke down to 25mm. If you need less fine-tune capacity, the adjacent SEJ40X125-20 offers 528 N at 0.5 MPa, while stepping up to the SEJ63X125-100 yields 1402 N. If the stroke never needs to change after setup, a fixed-stroke SED saves length and cost.
This cylinder provides 1154 N at 0.7 MPa and up to 168 kgf at 1.0 MPa. The field-adjustable air cushion at both ends decelerates the load near stroke end but is not a lock; for fail-safe position holding on air loss, specify an external rod lock. The PT1/4 port and M16x1.5 rod thread match standard ISO 15552 dimensions for direct mounting replacements.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can dial the effective stroke down by up to 100mm, giving an operating range of 25-125mm. Once set, you lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.