
The AirTAC SEJ Adjustable Cylinder SEJ50X125-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø50mm unit covers an effective stroke of 25–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X125-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly balanced at 825 N each way at 0.5 MPa. By turning the stop screw on the back rod, you mechanically dial the retract stroke anywhere from 25 mm up to the 125 mm nominal length.
This extruded aluminum barrel unit includes a magnet for CMSE reed or DMSE electronic sensors. It omits external tie rods for a clean profile, and provides field-adjustable air cushions at both ends to fine-tune end-of-stroke deceleration without relying on fixed bumpers.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X125-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 100 mm (25–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 825 N retract force and 25-125 mm stroke window to precisely set a forming die's end position during machine commissioning without machining new spacers.
Adjust the back-rod stop screw to shift the cylinder's effective stroke when switching a packaging line to a different carton height, locking the screw after setting.
Verify the 100 mm adjustment window covers your required end-position range. If you need less force, the 40 mm bore neighbor provides 528 N both ways at 0.5 MPa; stepping up to the 63 mm bore yields 1402 N. If you do not need on-machine stroke tuning, a fixed-stroke SED double-rod cylinder is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss, so use an external rod lock for fail-safe holding. When replacing an ISO 15552 cylinder, match the 50 mm bore, PT1/4 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The 100 mm adjustment window lets you mechanically dial the retract stroke from 25 mm up to the 125 mm nominal stroke by turning the stop screw on the back rod, then locking it in place.
Because the rod exits both ends, force is equal in both directions: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.