
The AirTAC SEJ Adjustable Cylinder SEJ50X125-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø50mm unit covers an effective stroke of 115–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X125-10S is a double-acting, double-rod ISO 15552 profile cylinder with a 10 mm adjustable stroke window, yielding an effective travel range of 115 to 125 mm. A stop screw on the rear rod lets you dial in the exact retract endpoint during machine commissioning without swapping hardware.
This extruded aluminum profile cylinder features field-adjustable air cushions at both ends to decelerate the 30-800 mm/s operating speed smoothly. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. It uses a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and omits FB/CA/CB/CR mountings in favor of Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X125-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 10 mm (115–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 115-125 mm retract stop on an electronic assembly press to apply exactly 825 N of seating force at 0.5 MPa without reprogramming the motion controller.
Adjust the rear-rod stop screw by up to 10 mm to rapidly accommodate different carton depths on a packaging line, leveraging the equal both-way force for consistent flap folding.
Use the double-rod design to push a conveyor stop gate from either side, fine-tuning the 125 mm end position to match varying product lengths while tracking position with a DMSE sensor.
Verify that the 10 mm adjustment window covers your positioning tolerance, giving you a 115-125 mm stroke range to fine-tune machine changeovers. If you need less thrust, the adjacent 40 mm bore provides 528 N at 0.5 MPa; if your load requires more power, stepping up to the 63 mm bore yields 1402 N at 0.5 MPa. For fixed-position applications requiring no end-point tuning, a standard SED double-rod cylinder offers a simpler setup.
When integrating this ISO 15552 dimensionally interchangeable cylinder, match the 125 mm stroke, 10 mm window, PT1/4 port, and mounting style. The adjustable air cushion decelerates the load near stroke end but does not function as a lock; a plain SEJ will not hold position on air loss, so specify an external rod lock for fail-safe holding.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 10 mm window, allowing you to set the effective travel anywhere between 115 mm and 125 mm. You lock the screw after finding the precise end position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.