
The AirTAC SEJ Adjustable Cylinder SEJ50X125-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø50mm unit covers an effective stroke of 105–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X125-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, yielding an effective travel range of 105-125mm. A rod exits both ends, meaning the annulus area is identical in both directions and generates an equal force of 825 N each way at 0.5 MPa. The integrated -S magnet enables position detection with CMSE reed or DMSE electronic sensors.
You dial in the exact retract end-position using a mechanical stop screw on the back rod, then lock it in place—ideal for fine-tuning during machine commissioning without swapping hardware. This extruded aluminum barrel omits external tie rods for a clean profile, includes field-adjustable air cushions at both ends to manage deceleration, and uses a PT1/4 port with a 20mm rod (M16x1.5 thread).
| Model | Airtac SEJ Adjustable Cylinder SEJ50X125-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 20 mm (105–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stop precisely to maintain a 1154 N clamping force at 0.7 MPa on delicate housings, fine-tuning the 105-125mm crush distance without swapping cylinders.
Leverage the -S magnet with DMSE electronic sensors to verify the moving fixture position, tweaking the 20mm stroke window during machine commissioning to hit the exact target.
Verify the 20mm adjustment window covers your required end-position variance. If you need less force, stepping down to the 40mm bore provides 528 N at 0.5 MPa; if your load requires more thrust, stepping up to the 63mm bore yields 1402 N at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED saves space and complexity.
This cylinder does not hold position on air loss—the adjustable cushion and stop screw only set the mechanical end and decelerate the load, so specify an external rod lock for fail-safe holding. Because the 125mm stroke is under 300mm, side-loading is less critical, but always align external guides with the 20mm rod to prevent binding. Ensure your ISO 15552 replacement matches the PT1/4 port, 105-125mm effective range, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The SEJ50X125-20S uses a stop screw on the rear rod to mechanically shorten the retract stroke. You can adjust the end-position within a 20mm window, giving an effective stroke range of 105 to 125mm. You lock the screw after setting the exact position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.