
The AirTAC SEJ Adjustable Cylinder SEJ50X125-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø50mm unit covers an effective stroke of 95–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ50X125-30S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust is equal both ways at 825 N at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 30 mm window, giving an effective 95-125 mm stroke range for precision machine commissioning.
It carries the -S magnet option for CMSE reed or DMSE electronic sensors. Bore 50 mm features a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and field-adjustable air cushions at both ends to decelerate near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ50X125-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 30 mm (95–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 95-125 mm retract position to mate with varying die heights, using the 825 N both-way force to seat and release tooling precisely.
Fine-tune the 30 mm window during prototype runs to find the exact metal forming angle before locking the stop screw for production.
This 30 mm adjustment window lets you fine-tune the retract end position on the machine without swapping hardware. If you need less force, the 40 mm bore provides 528 N both ways at 0.5 MPa; if you need more thrust, step up to the 63 mm bore for 1402 N. If the exact stroke never varies, a fixed-stroke SED is sufficient. For ISO 15552 replacement matching, confirm the 50 mm bore, 125 mm stroke, PT port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. At 125 mm stroke, the 20 mm rod handles normal loads, but always support heavy lateral loads with external guides.
AirtacDistr lists every SEJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sej50-adjustable-cylinder
Quick checklist
The retract end features a back-rod stop screw with a 30 mm adjustment window. You can dial the effective stroke down from 125 mm to 95 mm to fine-tune the end position on the machine.
Because the rod exits both ends, the annulus area is identical in both directions. It outputs 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and a maximum of 168 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.